Ddos & Spi; Mac Filter - D-Link DWR-922 User Manual

Section 3 - Configuration
The DDoS & SPI feature protects against Distributed Denial of Service (DDoS)
attacks, and helps to prevent cyber attacks by validating that the traffic passing
through the session conforms to the protocol.
Interface:
Select the network interface.
DDoS & SPI:
Check the box to enable DDoS & SPI protection.
Click Apply to save your settings.
The MAC Filter allows you to control which MAC addresses have access to the
network.

MAC Filter

To enable the MAC filter, select Only allow computers... or Only
Policy: deny computers.... If you are only allowing the specified MAC
addresses to access the network, then devices will not be able to
connect unless you create a rule and enter their MAC address.
Click Apply to save your settings.
MAC Filter Rules: Select whether the rule is Enabled or Disabled, to temporarily
turn it on or off without removing it entirely. Select the Protocol,
and then enter the Source MAC and Destination MAC addresses.
Click Apply to save the rule.
D-Link DWR-922 User Manual
DDoS & SPI
Mac Filter
31