Section 3 - Configuration
This page allows you to configure your connected phone devices. Each section can be accessed by selecting the appropriate option under
Phones and Devices.
Existing Analog
Displays a list of connected analog phones.
Phones:
Edit Analog
First, select a device by clicking on the Edit radio button in the
Phone:
Existing Analog Phones table above. Next, configure the phone
settings below. If you are not sure, leave the settings at their
defaults, or contact your phone manufacturer.
Incoming
Check the Enable for Incoming box to enable the phone to
Accounts:
received calls from the specified accounts.
Click Apply when you are done.
D-Link DWR-922 User Manual
Phones and Devices
Analog Phones
37