Technical Specifications - D-Link DWR-922 User Manual

Appendix C - Technical Specifications
LTE Band
• 800 / 900 / 1800 / 2600 MHz
UMTS/HSDPA/HSUPA Band
• 900 / 2100 MHz
• Power Class 3
Data Rates
2
• Up to 300 Mbps with 802.11n clients
• 6 / 9 / 11 / 12 / 18 / 24 / 36 / 48 / 54 Mbps in 802.11g mode
• 1 / 2 / 5.5 / 11 Mbps in 802.11b mode
• LTE Uplink: Up to 50 Mbps
• LTE Downlink: Up to 100 Mbps
Standards
• 802.11b/g, compatible with 802.11n devices
• 802.3
• 802.3u
Wireless Security
• 64 / 128-bit WEP (Wired Equivalent Privacy)
• WPA & WPA2 (Wi-Fi Protected Access)
Firewall
• Network Address Translation (NAT)
• Stateful Packet Inspection (SPI)
VPN
• L2TP/PPTP/IPSEC/VPN Pass-through
Antenna
• Two detachable 3G/4G antennas
Supported frequency band is dependent upon regional hardware version.
1
Maximum wireless signal rate derived from IEEE Standard 802.11g/b/n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
2
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
D-Link DWR-922 User Manual

Technical Specifications

1
Ports
• Four LAN ports (RJ-45)
• WAN port (RJ-45)
• Phone port (RJ-11)
USIM Slot
• Standard 6-pin SIM card interface
LED Status Indicators
• WAN
• LAN
• WLAN
• 3G
• 4G
• SMS
• VoIP
• Signal Strength
Dimensions
• 190 x 111.5 x 23.5 mm (7.48 x 4.39 x 0.93 inches)
Operating Temperature
• 0 to 40 ˚C (32 to 104 ˚F)
Operating Humidity
• 10% to 90% (Non-condensing)
Certifications
• CE
• Wi-Fi Certified
84