Hardware Overview - D-Link DIR-821 Quick Install Manual

Hardware Overview

1
1 Power LED
2 Internet LED
3 WPS LED
4
WLAN LED
5 LAN LEDs (1-4)
6 LAN Ports (1-4)
7
Internet Port
8 Reset Button
9 Power Port
10
Power Button
11 WPS Button
2 3 4
6
7
A solid green light indicates a proper connection to the power supply.
A solid green light indicates a connection to the Internet port.
A solid green light indicates a successful connection using WPS. The light
will blink during the WPS process.
A solid green light indicates the wireless function is working properly.
A solid green light indicates a connection to an Ethernet-enabled device on
ports 1-4 respectively.
Connect Ethernet devices such as computers, switches, and game consoles.
Connect a broadband modem to this port using an Ethernet cable.
Press and hold the reset button with a paper clip for 10 seconds to reset the
router to the factory default settings.
Connect the supplied power adapter.
Press to power the router on and off.
Press for 2 seconds to start the WPS process. The WPS LED will blink during
the process. The light will turn solid green when successfully connecting
to a device.
5
10 11
9
8
3