Applications - D-Link DWR-922 User Manual

4g lte router

Table of Contents

Section 3 - Configuration

On this page you can configure Application Layer Gateway (ALG) settings, allowing certain protocols to work through the NAT/firewall. You can

also specify special application rules, to open ports on your firewall and allow certain applications access to your network.

Enable PPTP:

Check the box to enable PPTP.

Enable L2TP:

Check the box to enable L2TP.

Enable IPSec:

Check the box to enable IPSec.

Enable

Select whether to Enable or Disable the specified application.

Application:

Interface:

Select the interface to apply the application rule to.

Name:

Enter a name for the application rule.

Trigger Protocol:

Select the protocol to use to trigger the rule.

Trigger Port:

Enter the port or range of ports to listen to in order to trigger the

rule.

Public Protocol:

Select the protocol that will be used to access the application.

Public Port:

Enter the port or range of ports that will be used to access the

application.

D-Link DWR-922 User Manual

Applications

Table of Contents

Show Quick Links

Table of Contents