Dhcp - D-Link DWR-922 User Manual

Section 3 - Configuration
On this page you can configure the Dynamic Host Configuration Protocol (DHCP) settings.
DHCP Server Check the box to enable the DHCP server on your router.
Enable:
IP Range: Enter the range of IPs for the DHCP server to use to assign IP
addresses to devices on your network.
Subnet Mask: Enter the subnet mask for the DHCP server to use
DNS Server: Enter the IP address of the DHCP server (the default is the router's
IP address).
Secondary DNS Enter the IP address of a secondary DNS server, if applicable.
Server:
Domain Name: Enter the domain name.
IP Router: Enter the IP address of the IP router.
DHCP Lease Enter the lease time for DHCP assignments. The default is 86400.
Time:
Check Enable to assign a new static IP address. Enter the MAC
DHCP Static
Address address of the client to assign, and the IP address that you want to
Configuration: assign to it.
D-Link DWR-922 User Manual

DHCP

22