Playing the Piano
Setting the Operation Confirmation Sounds
Because of the simple, piano-like design of this instrument, there are a minimum of panel controls, and most
settings are made using the keys of the keyboard. When you turn a function on or off, or change a setting, the
instrument produces a sound to confirm the change. There are three types of sounds used: an ascending
sound for on, a descending sound for off, and clicks for other settings. In the Metronome setting (page 17), a
numeric value is read out when a tempo is specified by a three-digit value using the keyboard.
For the list of functions assigned to the buttons and keys, see "Quick Operation Guide" (separate sheet).
Turning the Operation Confirmation Sounds on
Press the A♯-1 key while holding down the [DEMO/SONG] and the [PIANO/
Turning the Operation Confirmation Sounds off
Press the A-1 key while holding down the [DEMO/SONG] and the [PIANO/
Lowest key A-1
Changing the Touch Sensitivity
You can specify the Touch Sensitivity (how the sound responds to the way you
play the keys).
While holding down [PIANO/VOICE], press one of the A6 – C7 keys.
YDP-S52 Owner's Manual
The volume level does not change at all regardless of whether you
play the keyboard soft or hard.
The volume level does not change much when you play the
keyboard soft or hard.
This is the standard piano touch response.
The volume level changes very widely from pianissimo to fortissimo
to facilitate dynamic and dramatic expression. You have to hit the
keys hard to produce a loud sound.
Highest key (C7)
This setting is disabled with
some Voices, such as an