Dimmer; Operation Through The Irc Controller - ProLights Lumipix9HE User Manual

3.15 DIMMER

• Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times until
shows dIM, and press the button ENTER to confirm.
• Press the button UP/DOWN to select OFF - dIM1 - dIM2 - dIM3.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.16 OPERATION THROUGH THE IRC CONTROLLER

To control the LUMIPIX9HE with the infrared remote control:
• Press the button MENU repeatedly until SET, then press button ENTER to confirm.
• Using UP/DOWN button to select On or OFF to enable or disable the infrared remote control.
• Press the button ENTER to confirm the chose.
NOTE - Make sure to point the controller directly at the receiver on the product.
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the product.
To turn on Automatic Mode:
1. Press AUTO on the controller.
2. Press + or – to choose between the different auto programs.
To adjust the speed of the automatic program:
3. Press SPEED on the controller.
4. Press %.
5. Press + or – to either increase or decrease the speed of the program.
Sound Active Mode
Sound Active Mode will enable the product to respond to the music.
LUMIPIX9HE
IRC REMOTE
BLACK
AUTO SOUND
OUT
SENSI-
STROBE SPEED
TIVITY
%
FADE
MANUAL
SNAP
G B
R
UV W
A
+
0
1 2 3
5 6
4
7 8 9
Fig.8
17