Table of Contents
Advertisement
LUMIPIX9HE
12
3.11 DMX ADDRESSING
To able to operate the LUMIPIX9HE with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-
nel, adjust the start address 33 on the LUMIPIX9HE. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX Address
Next possible start
Next possible start
Next possible start
DMX channels
(example)
occupied
address for unit No. 1
address for unit No. 2
address for unit No. 3
4
33
33-36
37
41
45
DMX Address: 33
DMX Address: 42
DMX Address: 51
DMX Address: 60
. . . . . . . . . . . .
DMX512 Controller
Fig.5 - Example 4 DMX channels configuration
Advertisement
Chapters
Table of Contents
