Table of Contents
Advertisement
User Manual
4.5.7
Privacy Mask Settings
The Privacy Mask function aims to avoid any intrusive monitoring. When setting
a mask, it is suggested to set it at least twice bigger (height and width) than the
masked object. The Dome Camera will assume the center of the selected view
as a starting point. Therefore, please keep the target object/region nearly
positioned in the center of the scene. Refer to the following descriptions for
setting a privacy mask.
134
NOTE: The Image Flip function (refer to section
5.5.10 Camera—Misc
section
5.5.11 Camera—Misc
the Privacy Mask function is enabled.
1) and the Image Inverse function (refer to
2) will be disabled automatically while
Advertisement
Chapters
Table of Contents
