Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters - Mitel 6800i Series Administrator's Manual

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters

Format
Default Value
Range
Example
A-176
• callers - Indicates the key is configured to access the Callers List.
• redial - Indicates the key is configured to access the Redial List.
• conf - Indicates the key is configured as a Conference key.
• xfer- Indicates the key is configured as a Transfer key for transferring calls.
• icom - Indicates the key is configured to be used as the Intercom key.
• services - Indicates the key is configured to be used as the Services key.
• phonelock - Indicates the key is configured to be used to lock/unlock the phone.
• paging - Indicates the key is configured for Group Paging on the phone. Pressing this
key automatically sends a Real Time Transport Protocol (RTP) stream to pre-config-
ured multicast address(es) without involving SIP signaling.
• hotdesklogin - Indicates the key is configured to be used as a login key when utilizing
the Visitor Desk Phone hotdesk feature.
• empty - Indicates the key is configured to force a blank entry on the IP phone display
for a specific key.
The softkeys are added in order after any hardcoded keys have been added. If a particu-
lar softkey is not defined, it is ignored.
Text
none
none
line
speeddial
dnd ("Do Not Disturb" in the Mitel Web UI)
blf
list ("BLF/List" in the Mitel Web UI)
acd ("Auto call distribution" in the Mitel Web UI)
xml
flash
sprecode
park
pickup
lcr
callforward
blfxfer
speeddialxfer
speeddialconf
directory
callers ("Callers List" in Mitel Web UI)
redial
conf
xfer
icom
services
phonelock
paging
hotdesklogin
empty
softkey1 type: line
softkey2 type: speeddial
softkey3 type: lcr
softkey4 type: xml
41-001561-00 REV00 – 10.2014