Operational Features; Description; User Passwords; Passwords - Mitel 6800i Series Administrator's Manual

Operational Features

Description

This section describes the operational features managed and configured by a System Administrator.

User Passwords

A user or an administrator can change the user passwords on the phone using the configuration files, the IP phone UI, or
the Mitel Web UI.
Use the following procedures to change the user password.
Note:
The IP phones support numeric characters only in passwords. If you enter a password with alpha characters, the phone
uses the default password instead.
Configuring a User Password
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
IP Phone UI
For the 6863i/6865i:
1.
Press on the phone to enter the Options List.
2. Select User Password.
3. Enter the current user password.
4. Press Enter.
5. Enter the new user password.
Note:
The IP phones support numeric characters only in passwords. If you enter a password with alpha characters, the phone uses the default pass-
word instead.
6. Press Enter.
7. Re-enter the new user password.
8. Press Enter.
A message, "Password Changed" displays on the screen.
For the 6867i/6869i:
1.
Press to enter the Options List.
2. Select Lock > Password.
3. Press on the "Current Password" text box, and enter the current user password.
4. Press on the "New Password" text box, and enter the new user password.
41-001561-00 REV00 – 10.2014
Operational Features
"Password Settings" on page A-13.
5-4