HP ProLiant ML150 Operation Manual page 50

Installing and Configuring
Chipset
Use this menu option to configure the Intel E7500/E7501 chipset setting. Four choices are
available under Chipset.
•
Intel E7500/E7501 NorthBridge Configuration – Use this option to configure the Intel
E7500/E7501 NorthBridge chipset.
•
Intel ICH3 SouthBridge Configuration – Use this option to configure ICH3 IDE
controller settings.
•
Intel PCI-64 Hub 2 Configuration – Use this option to configure the Intel PCI-64 Hub
2 PCI hub chipset.
•
Spread Spectrum Setting – Enable or disable the spread spectrum.
ACPI
Use this menu option to configure the power management settings.
•
ACPI Aware O/S – Define whether the OS can manage IRQs, DMAs, and other system
settings on its own.
•
ACPI Advanced – Use this option to configure the advanced power management
settings.
•
After Power Fail – Set the mode of operation if an AC power failure occurs.
•
Power switch instant off – Enable or disable the instant on/off of a 4-second delay of the
power switch.
•
Watchdog Timer – Enable or disable the watch dog timer.
2-36
HP CONFIDENTIAL Codename: Stone Soup Part Number: 343329-001 Last Saved On: 8/14/03 10:09 AM
WARNING: Settings wrong values for the items in this menu may cause the system to
malfunciton.
CAUTION: Do not enable the Watchdog Timer item unless you are familiar with the feature. If
you enable this item, you must install the HP ML150 System Monitor (MSM) so that the server
can boot successfully with watchdog timer enabled. Please refer to the HP ProLiant ML150
Server NOS Installation and Software Guide for installation information on MSM.
HP ProLiant ML150 Server Operations and Maintenance Guide