Bios Setup Utility; Accessing The Setup Utility; Using The Setup Screens - HP ProLiant ML150 Operation Manual

BIOS Setup Utility

The HP server (BIOS) Setup Utility is used to configure the following server options:
•
Main
•
Advanced
•
PCIPnP
•
Boot
•
Chipset
•
ACPI
•
Security
•
Exit

Accessing the Setup Utility

The (BIOS) Setup Utility menu offers the choices listed above, and the corresponding items
are described in the topics below.
1. Turn on the monitor and the HP server.
2. Start the Setup Utility by pressing the Delete key when the following message displays
on the boot screen.
Press <Del> to enter SETUP

Using the Setup Screens

Online help explains the settings displayed on the Setup Utility screens. Instructions are also
provided for navigating between the screens and entering or changing the setup data.
•
Press the right-arrow and left-arrow keys to move between selections on the menu bar.
The menu bar is present at the top of the main selections.
•
Press the up-arrow and down-arrow keys to move between fields on each screen. The
currently-selected field will be highlighted.
•
Certain fields ask you to select from a list of entries. In such cases, press the right-arrow
or left arrow key repeatedly to change the entries.
•
Small arrow points ( ) precede some field names. This means the field is actually a
submenu. To visit the submenu, select it with the arrow keys and press the Enter key.
The submenu then displays in place of the current screen.
•
The Esc key is the exit key. If you press the Esc key on one of the top-level screens, the
Exit menu displays. If you press the Esc key on a submenu, the previous screen displays.
When you are making selections from a pop-up menu, use the Esc key to close the pop-
up without making a selection.
HP ProLiant ML150 Server Operations and Maintenance Guide
HP CONFIDENTIAL Codename: Stone Soup Part Number: 343329-001 Last Saved On: 8/14/03 10:09 AM
Installing and Configuring
2-33