Replacing A Direct Jet Print Head - Direct Color Systems Direct Jet 1024UVHS Maintenance And Troubleshooting Manual

Replacing a Direct Jet Print Head

Replace a Print Head if:
Some type of physical damage has occurred to the Print Head unit.
1)
Some electrical problem has occurred with the Print Head unit.
2)
There is a clog in the head that prevents the correct nozzle check pattern to be printed, and
3)
after all attempts at clearing the head, the head will not properly print the correct nozzle
check.
Contact Direct Color Systems for the print head replacement instructions and special tools
needed for replacing the print head.
DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2.docx
Go to table of contents
27 | P a g e