The Capping Station; Clean The Wiper Blade - Direct Color Systems Direct Jet 1024UVHS Maintenance And Troubleshooting Manual

The Capping Station

Clean the wiper blade

1. Press
2. Pull back on the tab as shown below and
then flip up the wiper.
the capping station. The picture is for
demonstration purposes only.
3. Wearing gloves, wipe the blade clean with an IPA wipe (provided in your cleaning kit). Inspect
the edge of the wiper blade for damage or irregular shaped dried ink that can't be removed
with cleaning. If it cannot be removed, the blade must be replaced. Contact DCS for
instructions for replacing the blade.
4. Return the blade to its original position.
5. Press the blue button again.
DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2.docx
. Manually move the capping station away from the print head.
Do not remove
Wiper
Go to table of contents
Tab
16 | P a g e