Monthly Or Periodic Maintenance - Direct Color Systems Direct Jet 1024UVHS Maintenance And Troubleshooting Manual

13. Clean the print head encoder strip for the X-axis. Using an IPA wipe, clean the
encoder strip.
Both sides of the encoder strip used by the print head
should be wiped
the cleaning kit) in order to remove any debris that may
have fallen on to it during the lubrication process or from
ink residue.
14. Clean the wiper blade. Clean the wiper in the capping station to avoid streaking in your
finished images and/or if drops of ink on the bottom of the head are not being wiped off
after a cleaning cycle.

Monthly or Periodic Maintenance

15. Inspect intake fan filter on UV lamp. Lift the cover. Press
head carriage. When it has stopped moving, manually move it to the far left of the shaft.
Inspect the fan filter.
Old filter
Change the intake fan filter
1. Press
move it to the far left of the shaft. Turn off main power.
2. Remove the 4 screws from the filter
retainer.
DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2.docx
gently with an IPA wipe (included in
to unlock the print head carriage. When it has stopped moving, manually
New filter
Go to table of contents
to unlock the print
13 | P a g e