Direct Color Systems Direct Jet 1024UVHS Maintenance And Troubleshooting Manual page 14

3. Discard the old filter.
4. Clean the retainer and fan guard with a dry cloth if needed.
5. Place the new filter over the fan guard and secure with the retainer and 4 screws.
16. Replace syringes and filling needles every 28 days. No more than every 28 days,
discard all filling syringes and filling needles. Begin using new ones.
17. Clean encoder wheel for Y-axis every 84 days. Clean with an IPA wipe.
18. Every 3 months, replace the capping station. Go to page 16 for instructions.
19. Replace all ink cartridges every 84 days or more often as needed.
DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2.docx
Retainer
Go to table of contents
Fan guard
14 | P a g e