Figure 63 - Ptz Select Camera Menu; Figure 64 - Ptz Preset Screen - PACOM PDRH-8-RT User Manual

User's Manual
To use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press
the Up and Down arrow buttons to tilt the camera up and down. Press the
and press the
You can establish preset positions for PTZ cameras. Press the
You can quickly move PTZ cameras to Preset positions. Press the
Preset position.
Figure 63 — PTZ Select Camera menu.
< Set Preset > < Move to Preset >
Figure 64 — PTZ Preset menu.
While in the PTZ mode, pressing the
displaying at the top of the screen displays the Advanced PTZ menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera manufacturer's
instructions for the proper settings. Depending on the camera specifications, some features may not
be supported.
You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of the screen, and the
following PTZ toolbar will display.
Clicking
the mouse pointer at the bottom of the screen. Change the toolbar location by clicking the empty
space on the left side of the toolbar and drag it to where you want it located on the screen. Use
the arrow buttons on the toolbar to pan or tilt the camera in the direction you want. The other
controls on the toolbar perform as described below:
46
button to zoom out. You can use the
You can save camera position settings as "presets" so that you can go directly
to desired views.
Once you have the camera at the desired settings, press the
Set Preset dialog box will appear. Select the number you want to assign to
the preset and press the
enter the preset name.
Press the button to load the PTZ preset and the Move to Preset dialog box
will appear. Select the desired preset and press the
button and selecting
MENU
on the left side exits the toolbar. If you want to display the toolbar again, position
Zoom In / Out
Iris Open / Close
and buttons to focus the image.
to establish Presets.
to view an established camera
(Play/Pause) button. Use the virtual keyboard to
button to load the preset.
(Advanced PTZ) in the menu
Focus Near / Far
Set / Load Preset
button to zoom in,
button, and the