Chapter 2 - Installation; Package Contents; Required Installation Tools; Video Input - PACOM PDRH-8-RT User Manual

Chapter 2 — Installation

Package Contents

The package contains the following:
 Digital Video Recorder
 Power Cord
 User's Manual (This Document)
 RAS Software CD and User's Manual
 Rack-mount Kit
 Assembly Screws and Guide Rails for Adding Hard Disk Drives
 Infrared Remote Control

Required Installation Tools

No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up
part of your system.

Video Input

Network Port
Factory Reset Switch
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Connect the coaxial cables from the video sources to the BNC Video In connectors.

Video Loop Through

Figure 2 — 16-Channel DVR rear panel.
Video Loop Through
RS232C Port
Power Cord Connector
Digital Video Recorder
RS485 Port Alarm Input/Output
Audio In/Out Video Out
3