Install The Picture Navigator Software; Launch The Picture Navigator Software And Select A Com Port - RCA CC6393 User Manual

Getting Started

2. Install the Picture Navigator software.

Refer to the Windows® manual of
your computer for details on basic
Windows® operating instructions.
1. Turn on and boot your computer.
2. Insert the Picture Navigator CD
into your CD ROM drive.
3. The Picture Navigator software
will begin to install automatically.
When the Welcome screen appears,
press Next to continue.
Note: If the Welcome screen does not
appear, double click My Computer,
double click your CD-ROM drive icon,
and double click the Setup.exe icon.

3. Launch the Picture Navigator software and select a COM port.

1. Restart your computer, and launch
Windows®.
2. Launch the Picture Navigator
software. The Bookshelf window
appears.
3. Select Preferences under the File
pulldown menu to display the
Preferences menu. Click on
Connect to display the Connect tab.
4
4. Verify the Destination Folder
where you want the program
installed, and press Next.
5. Click Finish to complete the
installation.
• Connect Port: Enter the number
of the COM port you connected
the camcorder to.
• Connection: Select cable.
• Baud rate: The maximum rate is
set automatically.
4. Click OK.