Install Clock Lithium Cell - RCA CC6351 User Manual

Install the Clock Lithium Cell
The clock cell indicator t_ flashes for a few seconds in the viewfinder or
on the LCD monitor when you turn on the camcorder if the cell has not
been installed or needs to be replaced.
Insert Object Here
to Remove Cell
Clock Cell
(+ Side Facing Out)
Clock Cell
1. Make sure camcorder is turned off, 4. Close the compartment cover. It
and remove any power supply clicks into place.
attached to the camcorder.
2. Press release tab of clock cell
compartment cover and open the
compartment.
3. Insert the clock cell with the "+"
terminal facing out, and press it in.
To Remove Lithium Cell
To remove battery, insert a pointed
nonmetallic object between battery and
compartment and lift.
17