RCA CC6393 User Manual page 25

Videocassettes
Insert and Remove Cassettes
Push Here to
Close Cassette
Compartment
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
Cassette Care and Storage
• When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold might damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
SP/SLP
EJECT Button
Button
Tape Wheel
Tape
Wheel
Tape
Window
1. Open the LCD monitor at least 60˚
before opening the cassette holder.
2. Slide EJECT. The cassette holder
opens automatically.
3. Insert the cassette with the tape wheel
facing up and tape window facing out.
4. Press on the area shown above until
the cassette holder locks into place.
• Keep dust from entering the cassette
compartment. All dust is abrasive and
causes excessive wear on the tape and
the camcorder's recording or playback
heads.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape might jam and/or damage your
camcorder.
CAUTIONS
Caution: Insert
Insert the cassette
the cassette
only one way with the
only one way
tape wheel facing up
with the tape
and the tape window
wheel facing up
facing out. The
and the tape
cassette should slide
window facing
easily into the holder.
out. The
Do not force the
cassette should
cassette.
slide easily into
Never try to open the
the holder. Do
door by prying as you
not force the
could damage the
cassette.
camcorder.
23