Control Connections; Remote Control; Rs232 Connection; Trigger 1 & 2 - Digital Projection M-Vision Cine LED User Manual

Digital Projection
M-Vision Cine LED

Control connections

The following connections are available:
Trigger 1
RS232

Remote control

If infrared signals from the remote control cannot reach the projector due to
excessive distance or obstructions such as walls or cabinet doors, you can connect
an external IR repeater to the Remote control input, and position its IR sensor within
range of the operator.

RS232 connection

All of the projector's features can be controlled via a serial connection, using the text
strings described in Remote communications protocol, in section 6. Appendix.
The RS232 connection can also be used to download the firmware updates, issued
from time to time by Digital Projection.
Computer
Trigger 1 & 2
The Trigger 1 and Trigger 2 outputs are interchangeable:
Screen trigger:
Aspect Ratio trigger:
Rev E October 2014
User Manual
Remote control
Trigger 2
can be connected to an electrically operated screen,
automatically deploying the screen when the projector
starts up, and retracting the screen when the projector
shuts down.
can be used to control screen shuttering for different
aspect ratios
Projector
2. Installation
Notes
For more information about pin
connections and control codes
see section 6. Appendix.
For more information about the
Trigger outputs see Control
Menu in section 4. Controlling
the projector.
Page 2.15