Table of Contents
Advertisement
4.2.8 Load Optimized Defaults BIOS
L
O
OAD
PTIMIZED
directly from ROM. If the stored record created by the Setup program
becomes corrupted (and therefore unusable), these defaults will load
automatically when you turn the POS-761F on.
Figure 4.8: Load Optimized Default BIOS screen
4.2.9 Set Password
To change the password, choose the S
Setup main menu and press <Enter>.
1.
If the CMOS is bad or this option has never been used, there is
default password which is stored in the ROM. The screen will dis-
play the following messages:
Press <Enter>.
2.
If the CMOS is good or this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen will display the following message:
POS-761F User's Manual
D
TS loads the default optimized system values
EFAUL
Enter Password
48
P
option form the
ET
ASSWORD
Advertisement
Table of Contents
