Chapter 2 Installation; Jumpers; Connectors - Advantech POS-761F User Manual

Chapter 2 Installation

2.1 Jumpers

The POS-761F has a number of jumpers that allow you to configure your
system to suit your application. The table below lists the function of each
of the board's jumpers
Table 2.1: Jumpers
J1
J2
J4
J5
J6
J7
J8
J9
J10,J11,J12
J13
J14
J15
J16
J17
J18
J19
J20

2.2 Connectors

On-board connectors link the POS-761F to external devices such as hard
disk drives, a keyboard, or floppy drives. The tables below lists the func-
tion of each of the board's connectors
POS-761F User's Manual
Mouse and IRQ12 function select
Setting CN9 DATSEL and CLKSEL function
Clear CMOS
DOC2K and DIO address select
Front pane
DIO connect
CF card power
SIR connect
Setting WatchDog trigger event
COM3 and COM4 power select
COM1 and COM2 pin 9 function select
COM1 and COM2 power select
COM3 and COM4 pin 9 function select
FIR connect
Setting Enable backlight signal level
Setting LCD Power
10