Copy Density Adjustment - Toshiba e-studio 211c Operator's Manual

4. COPY DENSITY ADJUSTMENT

There are two types of image density adjustments: manual mode (default setting) and automatic mode.
In the manual mode, you can select the desired level of image density. It is recommended that lighter-
density originals be copied in the manual copy density mode. In the automatic mode, the sensors
automatically detect the density of each original and select the optimum image density and background
level.
Manual Copy Density Mode
1 Place paper in the drawer(s).
2
Place the original(s).
3
Press either or
to the desired level.
- Each time you press the
come lighter or darker, respectively.
Select other copy modes as required.
4
Press the START key.
Automatic Copy Density Mode
1
Place paper in the drawer(s).
2
Place the original(s).
3 Press the AUTO key.
Select other copy modes as required.
4 Press the START key.
In the automatic copy density mode, the background level is
detected during copying, so the copying speed becomes
slower.
Page 2-4
Page 2-9
key to adjust the copy density
or key, your copies will be-
Page 2-4
Page 2-9
1
2
3
4
5
6
7
8
9
10
11
12
3-15