Table of Contents
Advertisement
3. ABOUT THE SETTING BEFORE SCANNING (Cont.)
Setting by the Administrator (Cont.)
Setting the FTP Server at the Default Setting
1
1
Perform steps 1 to 3 in page 8-23.
2
2
Press the FTP SETTING key.
3
4
5
3
Set the FTP server name.
- Press the area
right to switch to the letter input screen. Enter the FTP server
name within 128 letters using the alphabet (touch panel)
6
and numbers (digital keys), then press the SET key.
You can enter the IP address directly instead of the FTP server
7
name.
4
Key in the FTP port number (0-65535).
8
5
Key in the connection time (0-300) in 'FTP Time Out'.
9
6
Set the FTP user name.
- Press the area
10
right to switch to the letter input screen. Enter the FTP user
name within 128 letters using the alphabet (touch panel)
and numbers (digital keys), then press the SET key.
11
12
8-26
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
as shown on the screen on the
as shown on the screen on the
Advertisement
Table of Contents
