13. SETTING THE ENERGY SAVING MODE
This function allows the copier automatically to go into the energy saving mode (unnecessary electricity
is cut off at standby) if it is left inactive for a specified period of time.
- Energy-saving functions
-
ENERGY SAVER key
1
Press the PROGRAM key to enter the programme
menu, and press the ENERGY SAVE key.
- If the key for the desired function is not shown, press the
Next key to switch the screen.
2
Select the period of time (in minutes) on the display
allowed before the Automatic Energy Saving mode
is activated.
- The setting procedure finishes and the display returns to
the programme menu screen.
- The default setting is '60 minutes'.
If you do not want to use the automatic energy saving mode,
press the OFF key.
Clearing the Automatic Energy Saving Mode
Press the
ENERGY SAVER or
panel. The copier starts to warm itself up.
Page 1-10
Page 1-4
START key on the control
1
2
3
4
5
6
7
8
9
10
11
12
6-33