Bearings - Suzuki UF50 Service Manual

3-26 ENGINE
Apply a light coat of SUZUKI SUPER GREASE "A" onto the
end of the kick starter shaft.
99000-25010: SUZUKI SUPER GREASE "A"
Install the kick starter spring and hook its end 1 onto the
clutch cover boss 2.
Apply SUZUKI SUPER GREASE "A" onto the shaft and gear
of the kick starter drive gear.
99000-25010: SUZUKI SUPER GREASE "A"
Install the kick starter drive gear.

BEARINGS

Wash the bearing with a cleaning solvent and lubricate it with
motor oil before inspection. Rotate the inner race and check to
see that it turns smoothly. If it does not turn quietly and smoothly,
or if there are signs of any abnormalities, the bearing is defec-
tive and must be replaced with a new one.
REAR AXLE SHAFT BEARING
Remove the bearing retainer.
Remove the rear axle shaft bearing using the special tool.
09921-20220: Bearing remover set
Replace the removed bearing with a new one.
1
2
Play
Play