Suzuki UF50 Service Manual page 41

3-12 ENGINE
Remove the driveshaft using the special tool.
09920-13120: Crankcase separating tool
Remove the center stand spring 1.
Remove the cotter pin 2 and center stand shaft 3.
Remove the center stand 4.
Remove the crankcase bolts.
Separate the left and right crankcases using the special tool.
09920-13120: Crankcase separating tool
Remove the gaskets and dowel pins.
Replace the removed gaskets with new ones.
Remove the crankshaft using the special tool.
09920-13120: Crankcase separating tool