Chapter 1- Introduction; Preliminary Examination; Model Identification; General Description - Hanna Instruments HI 9829 Instruction Manual

Chapter 1 - INTRODUCTION

1.1 PRELIMINARY EXAMINATION

Remove the instrument from the packing material and examine it carefully to
make sure that no damage has occurred during shipping. If there is any dam-
age, notify your Dealer or the nearest HANNA Customer Service Center immedi-
atel y .
Note Save all packing materials until you are sure that the instrument
functions correctly. Any damaged or defective items must be returned
in their original packing material with the supplied accessories.

1.2 MODEL IDENTIFICATION

Meter: There are two models for the meter:
HI 9829: Portable multiparameter meter
HI 98290: Portable multiparameter meter with GPS
Probe: There are two base models of multiparameter probes:
HI 7609829: Standard multiparameter probe
HI 7629829: Multiparameter probe with autonomous logging
All meters and probes are fully compatible with each other, and all available
measurement sensors can be used on both probe models.
Different combinations of meters, probes, sensors and accessories can be or-
dered either in predefined configurations or individually. See Appendix D for
ordering configurations.
For example, ordering codes of probes follow:
HI 7609829/X is a HI 7609829 probe with X meter cable for pH/pH+ORP/
ISE, D.O., EC, temperature sensors with a short probe shield
HI 7619829/X is a HI 7609829 probe with X meter cable for pH/pH+ORP/
ISE, D.O., EC+turbidity, temperature sensors with a long probe shield
HI 7629829/X is a HI 7629829 logging probe with X meter cable for pH/
pH+ORP/ISE, D.O., EC, temperature sensors with a short probe shield
HI 7639829/X is a HI 7629829 logging probe with X meter cable for pH/
pH+ORP/ISE, D.O., EC+turbidity, temperature sensors with a long probe shield

1.3 GENERAL DESCRIPTION

HI 9829 is a portable logging multiparameter system that monitors up to 14
different water quality parameters (7 measured, 7 calculated).
The microprocessor-based intelligent multisensor probe allows measurement of
many water quality parameters such as pH, ORP, turbidity, dissolved oxygen,
capability
6