Meter Initialization - Hanna Instruments HI 9829 Instruction Manual

5.2 METER INITIALIZATION

After connecting the desired sensors to the probe and connecting the probe to
the meter (see previous chapter), turn the meter on by pressing ON/OFF.
After the initialization has been completed, the meter displays the PROBE STA-
TUS SCREEN.
The probe status screen identifies the probe and attached sensors. Non-logging
probes are identified as HI 7609829 and logging probes are identified as
HI 7629829.
Two active soft keys are found at the bottom of the status screen.
• Press <Measure> to access the measurement mode.
• Press <Param> to access the "Select Parameter" menu. (This screen can also
be accessed from the main menu, see Chapter 6 for a detailed description.).
• Press the DOWN arrow to view additional information about the probe.
27