Chapter 6 - Parameter Setup Menu; Select Parameters; Parameter Units - Hanna Instruments HI 9829 Instruction Manual

Multiparameter meter with available gps, logging probe, turbidity and ion measurements

Hide thumbs Also See for HI 9829:

Table of Contents

Chapter 6 - PARAMETER SETUP MENU

From the main menu, use the arrow keys to high-

light "Parameter Setup" and then press <Select>.

The following options will be displayed:

Use the arrow keys to scroll through the menu.

Press the right softkey to enable or disable a single

parameter, or the left softkey to enable or disable

all parameters. A checked box means that the

parameter is enabled.

Only the available parameters are present in the

list.

Note: If the password protection is enabled, you will be required to enter the

password before any parameters can be modified.

6.2.1 Temperature Unit

The user can select the measurement unit: °C, °F

or K. The default value is °C.

6.2.2 TDS Unit

The user can select ppm - ppt or mg/L - g/L

measurement unit. The default value is ppm - ppt.

6.2.3 DO Concentration Unit

The user can select ppm or mg/L. Dissolved

Oxygen concentration is calculated using %

saturation, conductivity and atmospheric pressure.

The default value is ppm.

6.2.4 Pressure Unit

The user can select one the following measure-

ment units: psi, mmHg, inHg, mbar, atm, kPA. The

default value is psi.

Table of Contents

Show Quick Links

Table of Contents