Chapter 8 - System Setup; Meter Setup - Hanna Instruments HI 9829 Instruction Manual

Multiparameter meter with available gps, logging probe, turbidity and ion measurements

Hide thumbs Also See for HI 9829:

Table of Contents

Chapter 8 - SYSTEM SETUP

From the main menu, select "System setup" and

then "Meter setup" or "Probe setup".

Note

If the password protection is enabled,

you will be required to enter the pass-

word before any settings can be modi-

fied.

8.1.1 Time

The meter uses a real time clock for logging. The

time and time format are set in this function.

Press <Modify> and set the time using the key-

pad. Press <Accept> to save the time. When us-

ing the 12 hour format, press A or P on the key-

pad for AM or PM after you set the time.

Press <Format> to change between 12 and 24

hour formats. The default format is 24 hours.

8.1.2 Date

The date and date format are set in this function.

Press <Modify> and set the date using the key-

pad. Press <Accept> to save the date.

Press <Format> to change between the avail-

able date formats: DD/MM/YYYY, MM/DD/YYYY,

YYYY/MM/DD, YYYY-MM-DD, MM-DD-YYYY,

and DD-MM-YYYY. The default format

is YYYY/MM/DD.

Table of Contents

Show Quick Links

Table of Contents