Reset Function; Factory Reset Function; System Information; Offset Mode - Chauvet Rogue R1 User Manual

Reset Function

Pan/Tilt Reset This option resets the Pan/Tilt functions to the home position.
Zoom Reset This option resets the Zoom function to the home position.
All Reset This option resets the all the functions to the home position.
Factory Reset
Function
System
Information

Offset Mode

Pan

Tilt

Rogue™ R1 Wash User Manual Rev. 2
This programming level allows the user to reset individual functions to the home position.
·
Starting from the Setup screen level, select Reset Function, press <ENTER>.
1. Highlight Pan/Tilt, press <ENTER>.
2. Select YES or NO, press <ENTER>.
1. Highlight Zoom, press <ENTER>.
2. Select YES or NO, press <ENTER>.
1. Highlight All, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This reverts the product back to its original factory settings.
·
Starting from the Setup screen level, select Factory Settings, press <ENTER>.
This programming level shows standard information regarding the product's operating status.
·
Starting from the Main Level screen, select Sys Info, press <ENTER>.
·
Ver: The current software version is displayed on the screen.
·
Running Mode: The current Running mode is displayed on the screen.
·
DMX Address: The current DMX address is displayed on the screen.
·
Temperature: The current product temperature is displayed on the screen.
·
Fixture Time: The product's total running time.
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen
appears.
2. Using <UP> to increase the number value and <DOWN> to move to the next column,
enter 2323, press <ENTER>. This brings you into the Zero Adjust menu screen.
1. Highlight PAN, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight TILT, press <ENTER>.
2. Select 000–255, press <ENTER>.
Operation
-13-