Basic Set Up; Switching The Handset On / Off; User Name Setting - NEC DXE Series User Manual

BASIC SET UP

Switching the Handset ON / OFF

User Name Setting

You can register the name on your handset.
Note : The user name shall be used just for the identification of handset. The user
name is displayed on your handset during idle status, and is not registered to
the system.
1 Press "Menu" Key.
ABC CORP
208
TelBook
3 Select "User Name" by pressing
Scroll Key, then press "OK" Key.
Opt. Charge ind.
Coverage Warning
User Name
OK
5 Press Clear Key to finish.
You can switch the handset ON by pressing
Off/On-Hook Key more than 2 seconds. You switch
it OFF by pressing Off/On-Hook Key again for more
than 2 seconds in the idle state.
2 Select "Telephone Options" by
pressing Scroll Key, then press
"OK" Key.
Menu
4 Enter the user name by using dial
digit keys, then press "OK" Key.
Esc
6
The display shall be changed as
below.
TelBook
10
Telephone Book
System
Telephone Options
OK Esc
Edit Name
MIKE
OK Esc
ABC CORP
MIKE
208
Menu