Charging & Operating Time - NEC DXE Series User Manual

Dect handset
Hide thumbs Also See for DXE Series:
Table of Contents

Advertisement

Charging & Operating Time
Charge the battery for 6-7 hours before using the DECT Handset for the first time.
This safety precaution extends the lifetime of your battery. The maximum
performance of the battery is only reached after 3 to 5 charging / discharging cycles.
Place the DECT Handset in the Holder regularly, in order to reach the optimum
battery charge.
Charging Time (to full capacity)
Call Time (fully charged)
Standby Time (fully charged)
The charge level of the battery shall be indicated by the
The symbol has the following meaning.
Note : When the battery has been replaced, there is no charge level display until a
whole charge and discharge cycle has been completed.
When the battery capacity is nearly exhausted, you may hear 3 short beep tone
repeated once a minute as a warning. If you are making a call at the time, you may
still have up to 5 minutes of call time before the handset switches itself off.
6-7 hours
up to 8 hours
up to 80 hours
75-100% charged
50-75% charged
25-50% charged
0-25% charged
(Frame flashes) nearly discharged
7
in the Display.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxe series

Table of Contents