Get Started; Connect The Docking Station; Connect The Remote Control; Connect And Position The Meeting Microphones - Philips Pocket Memo DPM8900 User Manual

3 Get started

Caution
• Ensure you have read the safety instructions before you
connect and install your recorder.  Safety instructions,
p. 5.

Connect the docking station

1
Plug the USB cable supplied with the docking station into
the power adapter and connect it to the main power
supply.
2
Insert the micro USB plug into the power adapter port
( ) on the rear side of the docking station.
3
Plug the USB cable supplied with the recorder into a USB
port on your computer.
4
Insert the micro USB plug into the USB port (
rear side of the docking station.

Connect the remote control

1
Connect the plug of the remote control to the remote
control (EAR) socket of the digital recorder.
Note
• When the remote control is connected, all buttons on
the digital recorder are still usable except the recording
function of the slide switch.
12 EN
Connect and position the meeting
microphones
1
Connect the plug of splitter cable to the microphone (MIC)
socket of the recorder.
2
Connect the plug of each microphone to one socket of the
splitter cable
3
For optimal recording quality, position the microphones on
the table so that all participants are not more that 2 meters
or 6.5 feet away from the microphone.
) on the
• For large meetings, the operating range can be extended
by joining together and connecting three microphones on
each of the two microphone sockets of the splitter cable.
5 m / 16.5 ft.
Tip
2 m / 6.5 ft.