Get Started; Charging The Battery; Turn The Device On And Off; Key Lock - Philips VoiceTracer DVT2110 User Manual

Hide thumbs Also See for VoiceTracer DVT2110:
Table of Contents

Advertisement

3. Get started

CAUTION
Before you connect your VoiceTracer, first
read the safety instructions (see
tions
[3]).

Charging the battery

• Charge the built-in battery before you use the device for
the first time or if you haven't used it for an extended time
period.
• If the battery is completely discharged and your device
turns off, allow the battery to charge for a while before
you turn on the device.
• A complete charging cycle takes about 3 hours.
• The device should be charged every 6 months even when
not used, to prevent the battery from completely draining
(deep discharge).
NOTE
• Before you charge the battery via computer,
make sure that your computer is turned on.
• While the device is connected to a computer, it
can't be operated manually.
• When the low battery icon
charge the device promptly.
• If you charge your device via computer instead
of using a power supply unit, the charging
speed might slow down due to a lower charg-
ing current. For fast charging, use a USB power
supply unit (not included).
Safety instruc-
X A charging battery icon appears on the screen and the
Record/Status LED flashes orange for a few seconds.

Turn the device on and off

To turn the device on or off:
• Slide and hold the Power switch on the right side of the
is displayed,

Key lock

You can lock your device when it's active to prevent any
unwanted device operations or access.
To lock the device:
• Slide the Power switch on the right side of the device
device downwards for three seconds.
upwards towards the lock symbol.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voicetracer dvt281008559710064340855971006458

Table of Contents