Download  Print this page

Get Started; Install The Recorder; Insert And Eject The Memory Card - Philips DPM7000 Instruction Manual

Hide thumbs

Advertisement

3 Get started

Caution
• Ensure you have read the safety instructions before you
connect and install your recorder.  Safety instructions,
p. 5.

Install the recorder

Note
• Charge the battery for 3 hours before first use.
The battery is pre-installed in the recorder. Pull the battery tape
off from the battery door before charging.

Insert and eject the memory card

The device operates with a SD/SDHC memory card and
supports cards with storage capacities of up to 32 GB. Your
recorder is packaged with a memory card already inserted and
formatted.
To insert and eject a memory card:
1
Locate the memory card slot on the top of the recorder.
2
Insert a memory card with the gold-colored contacts facing
down (toward front of the device).
3
Push the memory card in the memory card slot until it locks
in place.
4
To remove the card press the memory card slightly until the
snapping mechanism unlocks and the card is ejected.
11
EN

Advertisement

Chapters

Table of Contents

   Also See for Philips DPM7000

Comments to this Manuals

Symbols: 0
Latest comments: