E-Mail Setting; E-Mail Rx (Pop) - Oce cm3521 User Manual

Specifying settings using Web Connection
4.29

E-Mail Setting

E-Mail RX (POP)

You can specify the settings to perform the authentication of the e-mail
sender with POP Before SMTP.
Item
E-Mail RX Setting
POP Server Address
Login Name
Password
APOP Authentication
Connection Timeout
Port No.
Use SSL/TLS
Port No. (SSL/TLS)
Auto Receive Check
Polling Interval
cm3521
Description
Specify whether to use the e-mail reception setting.
Enter the receiving POP server address (syntax: "***.***.***.***"
or FQDN where the input range of *** is 0 to 255). When
entering the host name, select the "Please check to enter host
name." check box.
Enter the user name used to log on to the POP server (up to
63 characters).
Enter the password for logging on to the POP server (up to 15
alphanumeric characters).
Enables/disables APOP authentication.
Specify the connection timeout of the server (input range: 30
to 300 seconds).
Enter the server port number (input range: 1 to 65535).
Select to use SSL/TLS. Also, enter the port number to be
used.
Select whether to enable Auto Receive Check for e-mails re-
ceived.
If "Enable" was selected in Auto Receive Check, specify the
polling interval time (input range: 1 to 60 minutes).
4
4-95