Checking The Settings; To Check A Job - Oce cm3521 User Manual

Scanning documents
2.7

Checking the settings

Checking the settings
The selected setting can be checked in detail. The destination can be
changed on this screen.
The settings that can be viewed and changed are as follows:
Item
Type
Name
Dest.
Edit
Set Dest.
Save in Add. Book
The notification destination cannot be specified when using Scan to E-mail.
Note
If Changing the "From" Address from [Administrator Setting] — [System
Setting] — [Restrict User Access] — [Restrict Access to job Setting] is
specified as restricted, direct input cannot be performed.

To check a job

1
Press the [Mode Check] key in the control panel while the Scan mode
screen is displayed.
The Mode Check screen appears.
cm3521
Description
Displays the type of transmission.
Displays the registered destination name.
Displays the destination file path or the e-mail address.
Touch to change the destination.
Specify the notification destination for the e-mail message
that is sent when the data is transmitted, etc.
Touch when the address is not registered in the address book
such as when the address is entered through direct input.
Mode Check
2
2-67