Table of Contents
Advertisement
BASIC OPERATIONS
Side Key [PF1]/[PF2] function instruction
1.
VOLT:
Battery capacity inquiry: Under standby, press [PF1]/[PF2] key, the LCD displays the current
battery capacity, press the key again to exit.
2.
CALL:
Transmit the pre-stored DTMF Encode signal
3.
ALARM:
Activated by a long press of the [PF1]/[PF2] key. The LCD will display "ALARM" and the
transceiver will enable the preset alarm function.
4.
SUBPTT:
Press [PF1]/[PF2] key, transceiver will transmit on the sub-band frequency (use this function
to enable "Dual PTT").
5.
LAMP:
Press [PF1]/[PF2] to turn on/off the flashlight.
6.
Transmit tone pulse frequency:
selected tone pulse frequency. The tone pulse frequency can be set to 1750Hz / 2100Hz / 1000Hz /
1450Hz.
MONI Key Function
1.
Squelch off:
Press [MONI] key, which will open the squelch, you will hear any noise on the frequency.
Press [MONI] again, to close the squelch.
2.
Monetary Squelch off:
the frequency, By releasing [MONI] you will close the squelch.
3.
Transmit DTMF:
Press [PTT] and [MONI] to transmit DTMF signaling.
4.
Press and hold [MONI]
you to enter into the advanced function operations.
21
Press and hold [PTT] key, then press [PF1]/[PF2] key to transmit the
By holding the [MONI] key, the squelch will open, you will hear any noise on
while turning on the radio until the radio emits a responsive beep. This allows
Advertisement
Table of Contents
