7
General Setting
41
Switch the Mian band selector knob to choose wanted value.
MANUAL: Auto storage is turn off.
AUTO: Auto storeage is turn on.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to sore setup and exit.
MicRophone pA,pb, pc,pd key Setup
11
Press
key to enter function menu.
21
Turn the Main band selector knob to
choose No.28-31 menu. The LCD displays
"PG PA", "PG PB", "PG PC", "PG PD".
31
Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
51
Press the Main band selector knob or
21
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
For Menu details, please refer to Page 30-31, Microphone Operation.
NOTE
RF Squelch leVel Setup
When squelch level function is on, you can cancel squelch only when the
signal strength reach the level setup by users.
11
Press
key to enter function menu.
21
Turn the Main band selector knob to
choose No.32 menu. The LCD displays
"RF SQL".
31
Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
S-2: Able to hear the calling when the power meter reach 1 bar.
key to store value and
key or hold selector knob for over
key to store value and
S-5: Able to hear the calling when the power meter reach 4 bar.
S-9: Able to hear the calling when the power meter reach 8 bar.
S-FULL: Able to hear the calling when the
power meter reach full bar.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.
ScAn dwell tiMe Setup
11
Press
key to enter function menu.
21
Turn the Main band selector knob to
choose No.34 menu. The LCD displays
"SCAN".
31
Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
TIME: it pauses 5s once scanning a matching signal, then resume scan.
B U S Y: i t p a u s e s o n c e s c a n n i n g a
matching signal, then resume scan after
the signal disappeared for 2 seconds.
SECEDE: It Stops once scanning a matching signal, and exit scan.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.
pRioRity chAnnel ScAn
11
Press
key to enter function menu.
21
Turn the Main band selector knob to
choose No.35 menu. The LCD displays
"SCAN M".
key to store value and
key or hold selector knob for over
key to store value and
key or hold selector knob for over