Table of Contents
Advertisement
PREPARATION
Installing / Removing the Belt Clip
■ Installing the Belt Clip:
Place the belt clip to the grooves on the back of
the transceiver, and then install the screws, turning
clockwise.
■ Removing the Belt Clip:
Remove the screws turning counterclockwise,
allowing you to remove the belt clip.
Installing the Additional Speaker/ Microphone (Optional)
Unveil the MIC-SP jack cover and then insert the
Speaker/Microphone plug into MIC-SP jack.
NOTE:
The transceiver is not completely waterproof while
using the Speaker/Microphone.
10
Advertisement
Table of Contents
