Basic Operations; Turn The Radio On & Off; Adjusting Volume; Switch Between Main Band And Sub Band - AnyTone NSTIG-8R User Manual

BASIC OPERATIONS

Turn the Radio On & OFF
When the radio is off, turn the [POWER]/[VOLUME] knob clockwise to turn on
the transceiver. The transceiver will play a prompt tone and displays the current
channel on screen once it has fully powered on.
When the radio is on, turn the [POWER]/[VOLUME] knob counterclockwise until
you hear a "Click". The transceiver display will shut off once it has been turned off.

Adjusting Volume

When the radio is on, turn the [POWER] /[VOLUME] knob to adjust the volume. The volume increases
when you turn the knob clockwise and decreases when you turn the knob counterclockwise.
NOTE:
Press the [MONI] key to bypass the squelch. You can turn the [POWER]/[VOLUME] knob to control the
volume. For best results the volume may need to be adjusted during a live received transmission.

Switch between Main band and Sub band

While in standby, press
The Display Arrow will point to the current operating channel.

Switch between Channel mode and VFO mode

While in standby, press
frequency mode(VFO).
key to switch between the Main band and Sub band.
key to set the selected band into channel mode or
14