Table of Contents
Advertisement
BASIC OPERATIONS
Transmitting
According to how the [PF1] or the [PF2] key is setup in the programming software, hold the key programmed
as Sqelch Off to monitor the channel to ensure it is not in use, Then press the [PTT] key and talk into the
microphone. Keep the distance between your mouth and the microphone about 1-2 inches. Speak in your
normal voice (don't whisper and don't yell into the mic) for the best audio clarity.
NOTE: When pressing and holding the PTT key, the radio will transmit (and will be indicated by the red LED
light). Release the [PTT] key to receive calls.
Emergency Alarm
When the transceiver is in standby, press and hold the [ALARM] key until the LCD displays "ALARM". The
emergency alarm has now started. This transceiver has 4 Alarm modes. You can set up which mode works
best for you in the programming software. Power off the transceiver to exit Alarm.
Side Key [PF1] Setup and Use
[PF1] key can be customized to suit your needs, the available options are below:
15
Advertisement
Table of Contents
