Transmitting; Emergency Alarm; Side Key [Pf1] Function Instruction - AnyTone AT-3318UV Instruction Manual

Dual band handheld radio

Hide thumbs Also See for AT-3318UV:

Table of Contents

BASIC OPERATIONS

Transmitting

According to [PF2] key setup in programming software, hold [PF2] key to monitor the channel to ensure it

is not busy, press PTT key and talk to speaker.

Please keep the distance between mouse and speaker to be 2.5-5CM, speak in normal tone to get the

best acoustic fidelity.

NOTE: When press and hold PTT key, transceiver is transmitting if the red LED light is on, release PTT key

to receive calls.

Under standby state, press and hold alarm key until LCD displays "ALARM", Emergency alarm function is

started. This transceiver has 4 Alarm modes for optional, can be setup in programming software. Power

off transceiver to exit Alarm.

1. Battery capacity inquiry: Under standby, press [PF1] key, LCD displays current battery capacity, press

this key again to exit.

2. Transmit tone pulse frequency: Press and hold PTT key, then press [PF1] key to transmit selected tone

pulse frequency.

NOTE: The tone pulse frequency can be set to 1750Hz, 1450Hz, 1000Hz or 2100Hz in programming software.

Table of Contents