Microphone Pa,Pb, Pc,Pd Key Setup; Rf Squelch Level Setup; Offset Direction Setup; Scan Dwell Time Setup - AnyTone AT-5888UVIII User Manual

7
General Setting
41 Switch the Mian band selector knob to choose wanted value.
MANUAL: Auto storage is turn off.
AUTO: Auto storeage is turn on.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to sore setup and exit.

MicRophone pA,pb, pc,pd keY Setup

11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No.28-31 menu. The LCD displays
"PG PA", "PG PB", "PG PC", "PG Pd".
31 Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
51
Press the Main band selector knob or
25
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
For Menu details, please refer to Page 30-31, Microphone Operation.
NOTE

RF Squelch leVel Setup

When squelch level function is on, you can cancel squelch only when the
signal strength reach the level setup by users.
11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No.32 menu. The LCD displays
"RF SQL".
31 Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
S-2: Able to hear the calling when the power meter reach 1 bar.
key to store value and
key or hold selector knob for over
key to store value and
S-5: Able to hear the calling when the power meter reach 4 bar.
S-9: Able to hear the calling when the power meter reach 8 bar.
S-FULL: Able to hear the calling when the
power meter reach full bar.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.

oFFSet diRection Setup

11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No.33 menu. The LCD displays
"RPT MOd".
31 Press the Main band selector knob to enter function setup.
41 Switch the Main band selector knob to choose wanted Offset direction.
-: Minus offset, means transmitting frequency lower than receiving
frequency.
+: Plus offset, means transmitting frequency
higher than receiving frequency.
OFF: OFFSET is turn off. Transmitting frequency is same as receiving
frequency.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.

ScAn dwell tiMe Setup

11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No.34 menu. The LCD displays
"SCAN".
31
Press the Main band selector knob to enter function setup.
key to store value and
key or hold selector knob for over
7
key to store value and
key or hold selector knob for over